간행물

한중사회과학학회> 한중사회과학연구

한중사회과학연구 update

Korean-Chinese Social Science Studies

  • : 한중사회과학학회
  • : 사회과학분야  >  인문지리
  • : KCI등재
  • :
  • : 연속간행물
  • : 계간
  • : 1738-0456
  • :
  • :

수록정보
수록범위 : 1권0호(2003)~57권0호(2020) |수록논문 수 : 617
한중사회과학연구
57권0호(2020년 10월) 수록논문
최근 권호 논문
| | | |

KCI등재

1중국 인공지능 산업의 법률 규제에 관한 연구 -신산업에 대한 규제의 관점에서-

저자 : 김인식 ( Kim Insik )

발행기관 : 한중사회과학학회 간행물 : 한중사회과학연구 57권 0호 발행 연도 : 2020 페이지 : pp. 7-22 (16 pages)

다운로드

(기관인증 필요)

초록보기

중국은 인공지능 산업을 중국 산업 전반을 업그레이드 할 수 있는 핵심산업이자, 미래 산업의 핵심업종으로서 다양한 지원을 아끼지 않고 있다. 그러나 새로운 기술의 발전과 새로운 업종의 출현은 반드시 다양한 문제를 발생시킨다. 인공지능 기술의 발전은 이를 선제적으로 규제하여 문제를 방지할 것인가 혹은 안정적인 발전을 보장하여 육성에 집중할 것인가에 대한 문제를 발생시킨다.
인공지능 기술에 대한 중국의 태도는 규제보다는 육성을 강조하고 있다. 이러한 이유는 첫째, 중국은 산업이 충분히 발전하지 않은 현재 상태에서 새로운 규제모델을 수립하기는 현실적으로 어렵고; 둘째, 인공지능 기술을 산업정책의 핵심으로 설정하고 있는 중국으로서는 규제가 신기술발전과 신흥산업 육성을 저해할 것을 우려하고 있으며; 셋째, 중국의 특수한 상황으로 인하여 일부 쟁점은 크게 문제가 되지 않기 때문으로 볼 수 있다.


China is providing various support for the AI industry as a core industry that can upgrade the overall Chinese industry and as a core industry of the future industry. However, However, the development of new technologies and the emergence of new industries necessarily cause various problems. The development of artificial intelligence technology raises the question of whether to prevent problems by preemptively regulating it or whether to focus on fostering by ensuring stable development.
China's attitude toward artificial intelligence technology emphasizes fostering rather than regulation. The reason for this is: First, it is practically difficult for China to establish a new regulatory model in the current state where the industry is not sufficiently developed; Second, China, which has set artificial intelligence technology as the core of its industrial policy, is concerned that regulations will hinder the development of new technologies and fostering emerging industries; Third, it can be seen that some issues are not a big problem due to the special situation in China.

KCI등재

2아시아 주요국가 의료기기의 무역네트워크 분석

저자 : 고정오 ( Ko Jung O ) , Chinzorigt Narantsetseg

발행기관 : 한중사회과학학회 간행물 : 한중사회과학연구 57권 0호 발행 연도 : 2020 페이지 : pp. 23-37 (15 pages)

다운로드

(기관인증 필요)

초록보기

The global IMF predicts that Covid-19 pandemic will cause countries around the world to experience the worst recession since 1930. In 2020, Global trade in commodities declined by 11% in 2020, and the forecast for global economic growth was lowered to -3.0. Which is highly dependent on global trade cannot but be shocked by the Korea. However, Covid-19 pandemic has come as an opportunity from a crisis, and it is the domestic Bio-health industry such as medical devices area. This paper examines the influence position of Korea and Asian countries in the global medical device and network trade volume changed of the Asian countries increased during the period of H1N1 flu and MERS outbreaks since to 2012. The medical device trade network was analyzed by Eigen-vector and mediation centrality by utilizing the connection degree, by the which indicators are can evaluate the influence of nodes in the network in the medical device trade network analysis process.
The purpose of the this paper is to examine the trade of medical devices in the post-corona era is expected to increase significantly, we will how Korea's position is changing into the Asian countries and how it will affect the medical device industry in Korea.

KCI등재

321세기 중국철강산업의 파급효과 변화추이 연구 -2002, 2007, 2012, 2017년 중국 투입산출표를 중심으로-

저자 : 최정석 ( Choi Jung Seok )

발행기관 : 한중사회과학학회 간행물 : 한중사회과학연구 57권 0호 발행 연도 : 2020 페이지 : pp. 38-53 (16 pages)

다운로드

(기관인증 필요)

초록보기

In this paper, we analyzed the trend of ripple effects of the Chinese steel industry for 20 years from the 21st century to the present. In particular, in 2002, 2007, and 2012, industrial classification standards were used as medium classification criteria (42 items), but the input output table in China in 2017 used the industry classification criteria as sub-classification criteria (149 items). It can be seen that there is a difference in the fact that detailed analysis was conducted.
When looking at the related industries of the steel industry from 2002 to 2017, if there was a relationship mainly to traditional manufacturing industries such as communication equipment and other electronic equipment manufacturing, medical device manufacturing, electrical/mechanical and equipment manufacturing industries in the early 2000s.
It can be seen that, after the steel industry gradually changed its policy from quantitative to qualitative, a relationship was gradually formed with the specialized manufacturing industries, which added technology to the traditional manufacturing industries such as specialized equipment manufacturing, other manufacturing, and measuring/instrument manufacturing.
However, as a limitation of this study, the point of analysis that is always discussed is different from the present point. Because the publication of the input and output tables in China takes place on average 2-3 years later, it can be seen that there are difficulties in analyzing the current industrial relations.
However, in order to supplement this, research provides important implications from a single point of view, if follow-up research is conducted continuously for a long time, the existing development trend can be seen. It is expected that more abundant research results that can infer the direction will be drawn.

KCI등재

4한국과 일본의 대중국 고위기술 중간재 분업관계 분석

저자 : 이현주 ( Hyunju Lee )

발행기관 : 한중사회과학학회 간행물 : 한중사회과학연구 57권 0호 발행 연도 : 2020 페이지 : pp. 54-71 (18 pages)

다운로드

(기관인증 필요)

초록보기

The purpose of this paper is to analyze the changes in the Korea-China division of labor relations centered on the high-tech intermediate goods and to present the development direction of the high-tech intermediate goods division relationship amid the paradigm shift of the industrial policy between the two countries in the post-COVID 19 era. To this end, based on UNComrade D/B's BEC trade data, we examined the changes in bilateral trade relations between the two countries during the 2011-2019 period, and in particular, the division of high-tech intermediate goods and the trade competitiveness of major items were identified.
The main analysis results are summarized as follows. First, the proportion of high-value-added parts in Korea's export structure of intermediate goods to China has decreased, but the proportion of exports in high-tech sectors has increased in parts. Second, Korea's export competitiveness of intermediate goods in high-tech sectors to China, which was examined through the TSI, has been continuously decreasing. Third, the export structure of Korea's high-tech parts to China showed the trend of decreasing export competitiveness of electronic components, electrical diagnostic devices, and telecommunication equipment parts, which Korea had been competitive in.
As an indication of this, Korea needs to maintain a continuous division of labor, focusing on items with clear export competitiveness in the import and export of parts in the high-tech sector. Second, Korea's export competitiveness in parts trade in the high-tech sector has been decreasing recently, but it needs to focus its policy capabilities on securing competitiveness in the group of items with strategic values that are important in the industrial policy. Finally, it is necessary to pursue the transition to the Korea-China divisional labor model in various sectors such as R&D, trial application and technology patent for technical cooperation as well as divisional relations through the trade of parts in high-tech fields.

KCI등재

5区域经济发展差异对区域经济发展的影响 -基于工业化的动态面板门槛模型实证研究-

저자 : 李勃晔 ( Boye Li ) , 金相郁 ( Sangwook Kim )

발행기관 : 한중사회과학학회 간행물 : 한중사회과학연구 57권 0호 발행 연도 : 2020 페이지 : pp. 72-89 (18 pages)

다운로드

(기관인증 필요)

초록보기

工业化促进了区域经济的发展的同时, 也造成了区域间经济发展差异的加大。前人研究中要么多注重于区域间经济发展差异与区域经济增长的影响, 又或是工业化水平对于区域间经济发展差异的研究, 或者是工业化水平对于区域经济增长的研究。很少有学者将此三者相互结合进行研究。 那么工业化发展到什么程度时, 区域经济发展差异与区域经济发展会产生什么样的影响呢? 这则是一个待以研究的问题。所以本文将以工业化为线索, 来探讨区域经济发展差异与区域经济发展间的影响。本文选取了1998-2017年间中国31个省级单位的面板数据, 首先, 先对区域经济发展差异对区域经济发展间的关系进行了研究, 因为区域经济发展具有内生性, 本文使用了SYS-GMM估计方法进行研究, 该研究方法选取人均GDP为因变量, 变异系数, 工业化水平以及人均资本为自变量, 模型验证了三个方面: 首先, 中国区域经济增长与区域经济发展差异存在倒U型关系。其次, 区域经济发展差异的增长, 可以促进中国区域经济的发展。最后, 工业化水平的提升也会促进区域经济的发展。之后以工业化为主要线索, 将其定义为门槛变量, 使用包含内生性的动态门槛模型进行研究。发现了区域经济的发展存在基于工业化的门槛, 各区域的工业化门槛值及区域经济发展差异系数均围绕全国水平上下波动, 对比地区间的门槛值, 全国, 东部地区, 中部地区, 西部地区的工业化门槛值为正, 东北部地区的门槛值为负。对比门槛前后的区域经济发展差异系数则发现, 根据地区的不同, 区域经济发展差异对区域经济发展产生了促进或抑制的影响。


While industrialization has promoted the development of regional economy, it has also caused an increase in the gap in economic development between regions. Previous studies either focused more on the impact of differences in regional economic development and regional economic development, or the level of industrialization on the differences in regional economic development, or the level of industrialization on regional economic development. Few scholars combine these three to study. So, what kind of impact will the difference in regional economic development and regional economic development have when the degree of industrialization develops? This is a question to be studied. Therefore, this article will use industrialization as a clue to discuss the impact of regional economic development differences and regional economic development. This paper selects the panel data of 31 provincial units in China from 1998 to 2017. First, the difference of regional economy development studied the relationship between regional economic development, due to the region economy development is endogenous, this paper uses the SYS-GMM estimation method for research. The research method selects per capita GDP as the dependent variable, coefficient of variation, industrialization level and per capita capital as independent variables. The model verifies three aspects: First, China's regional economic development and regional development disparity has an inverted U-shaped relationship. Secondly, the development of regional economic development disparity can promote China's regional economic development. Finally, the increase in the level of industrialization will also promote the development of the regional economy. After that, industrialization was taken as the main clue, and it was defined as a threshold variable, and the dynamic threshold model including endogeneity was used for research. It is found that the development of regional economy has a threshold based on industrialization. The industrialization threshold value of each region and the regional economic development difference coefficient fluctuate around the national level. Compare the threshold value between regions, the industrialization of the whole country, eastern region, central region, and western region. The threshold value is positive, and the threshold value in the northeast is negative. Comparing the coefficients of regional economic development disparity before and after the threshold, it is found that depending on the region, the regional economic development disparity has promoted or inhibited regional economic development.

KCI등재

6The Effect of Internal Control on Financial Risk of Chinese Listed Companies

저자 : Xiao Wang , Shanyue Jin

발행기관 : 한중사회과학학회 간행물 : 한중사회과학연구 57권 0호 발행 연도 : 2020 페이지 : pp. 90-107 (18 pages)

다운로드

(기관인증 필요)

초록보기

Since the start of the 21st Century, there have been frequent instances of financial fraud in listed companies, which have exposed defects in internal control systems and aroused unprecedented attention from both theoretical and practical circles. Therefore, the purpose of this study is to verify that an internal control system can actually reduce an companies' financial risk. Taking a sample of 300 A-share listed companies in China from 2016 to 2018, this paper proposes the hypothesis that the five elements of internal environment, risk assessment, control activities, information and communication, and internal supervision are related to financial risk. Using Z-Score Model, the results show that the five factors are negatively correlated with financial risk, with the correlations between financial risk and internal environment, control activities, and internal supervision being more significant. This study suggests that we should speed up the improvement of government supervision and management systems related to internal control. Also, companies should improve the independent board director system and establish a balanced shareholding structure.

KCI등재

7가치네트워크의 재구성에 기반한 인터넷기업의 비즈니스 혁신모델 -바이트댄스 기업사례를 중심으로-

저자 : 贾莉莉 ( Lili Jia ) , 남은영 ( Eun-young Nam ) , 천동필 ( Dong-phil Chun )

발행기관 : 한중사회과학학회 간행물 : 한중사회과학연구 57권 0호 발행 연도 : 2020 페이지 : pp. 108-129 (22 pages)

다운로드

(기관인증 필요)

초록보기

치열한 경쟁과 기술 변천으로 기업의 가치범주는 지속 변화하여 최근 기업가치 실현이 고객가치 창출에서 분리되는 현상이 나타나고 있다. 이에 기업은 고객가치 극대화를 실현하더라도 수익보장은 어려운 상황에 직면하게 되었고, 이전과 달리 인터넷 무료경제를 활용한 가치네트워크의 재구성과 새로운 수익원 개척이 전제가 되어야 이익 실현과 비즈니스 모델의 안정성을 보장할 수 있게 되었다.
본 논문은 가치네트워크 재구성의 시각에서 베이징 바이트댄스과학기술유한회사(北京字节跳动科技有限公司)의 사례 분석을 통해 가치 네트워크를 재구성하고 5가지 비즈니스 모델 혁신 방법을 도출하였다. 상기 회사는 인공지능 기술을 활용하여 고객 수요를 파악하고, 기업과 고객, 공급업체 간 정보 교류 및 추가적인 생산확대 지원을 통해 효율적인 상호작용과 협력을 수행하고 있다.
기업은 가치창조와 가치배분간 합리적인 정립과 경쟁과 협력간 균형을 통해 비즈니스 혁신을 꾀하여 기업가치와 고객가치의 안정적인 성장을 실현해야 한다.


Driven by competitive pressure and technological change, the organization's value creation logic presents subversive changes: the separation of customer value creation and enterprise value realization. This separation has helped businesses to maximize customer value without necessarily generating revenue. In the Internet free economy, enterprises can record profit and ensure the stability of a business model by reconstructing the value network and expanding the new revenue sources. Based on the analysis of the reconstruction path of the value network of Beijing Byte Dance Technology Co. Ltd., this paper uses the case analysis to find how Beijing Byte Dance focuses on its customer. The company uses artificial intelligence (AI) technology to understand the customer's demand. The company also relies on information distribution of the enterprise, the customers, and the suppliers to carry out effective interaction and cooperation. Besides, the company supports additional product promotion. Complementary products reduce the cost of focus enterprises, promote the five business models of innovation, and restructure the enterprise value network to extend and create value. The company goal is also to deal with the relationship between value creation and value distribution, improving the balance between competition and cooperation, and realizing the innovation of business models. This model has also steadily increased the company's value and customer prices.

1
권호별 보기
가장 많이 인용된 논문

(자료제공: 네이버학술정보)

가장 많이 인용된 논문
| | | |
1연안해역에서 석유오염물질의 세균학적 분해에 관한 연구

(2006)홍길동 외 1명심리학41회 피인용

다운로드

2미국의 비트코인 규제

(2006)홍길동심리학41회 피인용

다운로드

가장 많이 참고한 논문

(자료제공: 네이버학술정보)

가장 많이 참고한 논문

다운로드

2미국의 비트코인 규제

(2006)홍길동41회 피인용

다운로드

해당 간행물 관심 구독기관

대진대학교 서울대학교 고려대학교 경희대학교 부산산업과학혁신원(부산과학기술기획평가원)
 48
 43
 42
 39
 29
  • 1 대진대학교 (48건)
  • 2 서울대학교 (43건)
  • 3 고려대학교 (42건)
  • 4 경희대학교 (39건)
  • 5 부산산업과학혁신원(부산과학기술기획평가원) (29건)
  • 6 성균관대학교 (29건)
  • 7 연세대학교 (28건)
  • 8 선문대학교 (27건)
  • 9 이화여자대학교 (26건)
  • 10 한국외국어대학교 (21건)

내가 찾은 최근 검색어

최근 열람 자료

맞춤 논문

보관함

내 보관함
공유한 보관함

1:1문의

닫기